Plywood table making for "Interactive Sound Table"_#05, 2011

#33

Final product (shock sensors were not installed yet).

#32

Final product.

#31

2011-05-19 : Polyester resin was put on bottom sides of the table top acrylic boards. In addition, surface sides of the table top were sandblasted when polyester resin dried.

#30

2011-05-18 : 5 clear acrylic boards were adjusted to fit the table.

#29

2011-05-18 : A lamp holder (made by Nigel, a metal technician) and wires for electricity were installed.

#28

2011-05-17 : Long sides of table were shaped into flat, parts to support table tops were curved with routers and chisels.

#27

#26

2011-05-16 : Now all wooden parts became one piece!

Plywood table making for "Interactive Sound Table"_#04, 2011

#25

#24

#23

2011-05-13 : All parts were assembled, glued and clamped in the same time.

#22

2011-05-12 : A plywood part and a flat birch plywood (cut from a factory-made board) part for a leg were glued with biscuit joints.

Plywood table making for "Interactive Sound Table"_#03, 2011

#21

#20

#19

#18

#17

2011-05-11 : Trial assembling without glue.

Plywood table making for "Interactive Sound Table"_#02, 2011

#16

#15

#14

2011-05-11 : Grooves for tongue were cut with a small router and chisels.

#13

2011-05-11 : Curves for corners, tongues, joints for bottom were shaped with a hand jigsaw, routers and chisels.

#12

#11

#10

2011-05-05 : Two short plywood parts for sides were shaped with a hand zig saw, a big router and chisels.

Plywood table making for "Interactive Sound Table"_#01, 2011

#09

#08

2011-05-01 : A longer part was failed!! (Vacuum time was too short).

#07

2011-04-28 : The first short part was made.

#06

2011-04-21 : Vacuum equipment for making plywood.

#05

2011-04-21 : Aeroply and flexiboard (for shot part) was set to vacuum.

#04

2011-04-21 : Aeroply and flexiboard.

Plywood table making for "Interactive Sound Table"_#00, 2011

#03

2011-04-15 : A Mould for plywood was improved to be easy to set.

#02

#01

#00

2011-04-13 : Mould making for plywood.

Lamp 'Venetian palace', 2010

My work for "Gallery Project' of the university Decorative Arts course.

Lamp 'Rose Window', 2010

My work for "Gallery Project' of the university Decorative Arts course.

Landscape Window, 2009

My work for "Commission Project" of the university Decorative Arts course.

Shelf '成長 / Growth',2008

My work for 'Object Of Desire' wood project in the university Decorative Arts course.