Plywood table making for "Interactive Sound Table"_#04, 2011

#25

#24

#23

2011-05-13 : All parts were assembled, glued and clamped in the same time.

#22

2011-05-12 : A plywood part and a flat birch plywood (cut from a factory-made board) part for a leg were glued with biscuit joints.

Plywood table making for "Interactive Sound Table"_#03, 2011

#21

#20

#19

#18

#17

2011-05-11 : Trial assembling without glue.

Plywood table making for "Interactive Sound Table"_#02, 2011

#16

#15

#14

2011-05-11 : Grooves for tongue were cut with a small router and chisels.

#13

2011-05-11 : Curves for corners, tongues, joints for bottom were shaped with a hand jigsaw, routers and chisels.

#12

#11

#10

2011-05-05 : Two short plywood parts for sides were shaped with a hand zig saw, a big router and chisels.

Plywood table making for "Interactive Sound Table"_#01, 2011

#09

#08

2011-05-01 : A longer part was failed!! (Vacuum time was too short).

#07

2011-04-28 : The first short part was made.

#06

2011-04-21 : Vacuum equipment for making plywood.

#05

2011-04-21 : Aeroply and flexiboard (for shot part) was set to vacuum.

#04

2011-04-21 : Aeroply and flexiboard.

Plywood table making for "Interactive Sound Table"_#00, 2011

#03

2011-04-15 : A Mould for plywood was improved to be easy to set.

#02

#01

#00

2011-04-13 : Mould making for plywood.

FACES for Japan, 18-05-2011

#0128_ジョージィ

#0127_ケブ

#0126_アルネン

FACES for Japan, 04-05-2011

#0125_ミキ