#21
This is the final artwork.
#20
After the first colour is dried, print with the second block and dry these prints completely.
#19
Print with the first block with using process #11 -13. You should start from PALER colour.
#18
You should give some moistures to sheets of printing paper. Use wet towels or newspapers for it.
#17
Trial prints of two blocks. Check combination of colours and shapes and adjust them if you need.
#16
Trial prints of the second block.
#15
Repeat the same process for the second block.
#14
Trial prints of the first block.
#13
Set a piece of paper at two guide parts strictly, and print with a barren carefully.
#12
Put a colour on the first block.
#11
Do not soak a brush for boards in colour directly to avoid to put too much paint on board, if not, details of design will be lost.
#10
Prepare and check colours.
#09
