My quick drawings, from April to May 2012.
2012年7月25日水曜日
2012年7月20日金曜日
2012年6月28日木曜日
2012年5月19日土曜日
2011年12月7日水曜日
Wood block print making_01, 2011
#21
This is the final artwork.
#20
After the first colour is dried, print with the second block and dry these prints completely.
#19
Print with the first block with using process #11 -13. You should start from PALER colour.
#18
You should give some moistures to sheets of printing paper. Use wet towels or newspapers for it.
#17
Trial prints of two blocks. Check combination of colours and shapes and adjust them if you need.
#16
Trial prints of the second block.
#15
Repeat the same process for the second block.
#14
Trial prints of the first block.
#13
Set a piece of paper at two guide parts strictly, and print with a barren carefully.
#12
Put a colour on the first block.
#11
Do not soak a brush for boards in colour directly to avoid to put too much paint on board, if not, details of design will be lost.
#10
Prepare and check colours.
#09
Wet the BOTH sides of the wood block to avoid it bends. You have to keep the board moist during printing process.
Wood block print making_00, 2011
#08
Now the second block has been carved.
#07
Carve the second block. Do not forget two guide parts.
#06
All parts of the first block have been carved.
#05
Carve the first block with various chisels.
#04
Carve two guide parts (called as "kento 見当" in Japanese) at first. This is the most important parts of multi-coloured print.
#03
Copy the design on the another block too.
#02
Copy the design and guides on a wood block with carbon paper. Do not forget turn the design sheet over.
#01
Trace the design and guides on a sheet of tracing paper.
#00
Tools and materials. you need pens, pencils, papers, a sheet of tracing paper and a carbon sheet too.
Now the second block has been carved.
#07
Carve the second block. Do not forget two guide parts.
#06
All parts of the first block have been carved.
#05
Carve the first block with various chisels.
#04
Carve two guide parts (called as "kento 見当" in Japanese) at first. This is the most important parts of multi-coloured print.
#03
Copy the design on the another block too.
#02
Copy the design and guides on a wood block with carbon paper. Do not forget turn the design sheet over.
#01
Trace the design and guides on a sheet of tracing paper.
#00
Tools and materials. you need pens, pencils, papers, a sheet of tracing paper and a carbon sheet too.
登録:
投稿 (Atom)
















































